Page 2
First, connect the power adapter to the receptor at the back panel of the DWL-7000AP and then plug the other end of the power adapter to a wall outlet or power strip. The Power LED will turn ON to indicate proper operation.
When you have completed the steps in this Quick Installation Guide, your connected network should look similar to this: Using The Setup Wizard Open your Web browser and type “http://192.168.0.50” into the URL address box. Then press the Enter or Return key. The logon pop-up screen will appear.
Page 4
Using The Setup Wizard (continued) Once you have logged in, the Home screen will appear. Click Run Wizard You will see the following screens. Click Next...
Page 5
Click Next Step 3 WEP Encryption for 802.11a The DWL-7000AP is capable of 64, 128, and 152bit encryption. Select the key size you wish to use and enter the key in the field provided. By default, WEP is Disabled.
Page 6
Click Next Step 3 WEP Encryption for 802.11g The DWL-7000AP is capable of 64, 128, and 152bit encryption. Select the key size you wish to use and enter the key in the field provided. By default, WEP is Disabled.
Page 7
Status tabs on the web-management interface; or to the manual located on the CD-ROM. • For managing several DWL-7000AP’s, please utilize the D-Link AirXpert Access Point Manager. For the latest version of the firmware or AP manager please go to...
Technical Support You can find software updates and user documentation on the D-Link website. D-Link provides free technical support for customers within the United States and within Canada for the duration of the warranty period on this product. U.S. and Canadian customers can contact D-Link technical support through our website, or by phone.
Need help?
Do you have a question about the AirXpert DWL-7000AP and is the answer not in the manual?
Questions and answers