Dhcp Server Commands - D-Link DWL-7700AP Command Line Interface Reference Manual

Command:
dhcps help Display DHCP Server Command Help
dhcps state get DHCP Server state
dhcps state <on:off> turn on or turn off DHCP Server
dhcps dynamic info get current settings
dhcps dynamic ip set start ip
dhcps dynamic mask set netmask
dhcps dynamic gw set gateway
dhcps dynamic dns set dns
dhcps dynamic wins set wins
dhcps dynamic range set range
dhcps dynamic lease set lease time (sec)
dhcps dynamic domain set domain name
dhcps dynamic state set state
dhcps dynamic map get mapping list
dhcps static info get setting from <0-255> to <0-255>
dhcps static ip set static <id> pool start ip
dhcps static mask set static <id> pool netmask
dhcps static gw set static <id> pool gateway
dhcps static dns set static <id> pool dns
dhcps static wins set static <id> pool wins
dhcps static domain set static <id> pool domain name
dhcps static mac set static <id> pool mac
dhcps static state set static <id> pool state
dhcps static map get static <id> pool mapping list
Note: The DHCP server function is to assign Dynamic IP to Wireless Client devices. It doesn't assign IP to Ethernet port.
802.11 a/b/g Access Point Command Line Interface Manual
Function
19
9
DHCP S
ERVER
Syntax
dhcps help
dhcps state
dhcps state [on:off]
dhcps dynamic info
dhcps dynamic ip <x.x.x.x>
dhcps dynamic mask <x.x.x.x>
dhcps dynamic gw <x.x.x.x.>
dhcps dynamic dns <x.x.x.x>
dhcps dynamic wins <x.x.x.x>
dhcps dynamic range [0-255]
dhcps dynamic lease [60- 864000]
dhcps dynamic domain <string>
dhcps dynamic state [on:off]
dhcps dynamic map
dhcps static info [0-255] [0-255]
dhcps static <id> ip <x.x.x.x>
dhcps static <id> mask <x.x.x.x>
dhcps static <id> gw <x.x.x.x.>
dhcps static <id> dns <x.x.x.x>
dhcps static <id> wins <x.x.x.x>
dhcps static <id> domain <string>
dhcps static <id> mac <xx:xx:xx:xx:xx:xx>
dhcps static <id> state [on:off]
dhcps static map
C
OMMANDS