Description - Siemens RUGGEDCOM RMC30 Installation Manual

Chapter 1
Introduction
• Support multiple Modbus masters
• Use Serial IP port redirection software to support PC applications statistics and built-in sniffer for
troubleshooting
Designed for Harsh Environments
• Operates over a temperature range of -40 to 85 °C (-40 to 185 °F) without the use of fans for improved
reliability
• 21 AWG galvanized steel enclosure suitable for DIN or panel mounting provide secure mechanical reliability
Section 1.2

Description

The RUGGEDCOM RMC30 features various ports, controls and indicator LEDs on the display panel for connecting,
configuring and troubleshooting the device. The display panel can be located on the rear, front or top of the
device, depending on the mounting configuration.
Figure 1: RUGGEDCOM RMC30
1. ALARM LED 2. POWER LED 3. Serial Terminal 4. Reset Button 5. Copper Ethernet Port with LEDs 6. TX LED 7. RX LED
8. Power Terminal Block 9. Chassis Ground Terminal
ALARM LED
POWER LED
RESET Button
TX/RX LEDs
2
1 2 3
4 5
Illuminates when an alarm condition exists.
Illuminates when power is being supplied to the device.
State
Green
Off
Shuts down and restarts the device. For more information, refer to
the Device"
Indicate the connection status of the serial terminal.
6
7
.
Installation Guide
8 9
Description
Power is on
Power is off
Section 2.4, "Resetting
RUGGEDCOM RMC30
Description