Continuous Drainage - INVENTOR R2-ION8L User Manual

Continuous Drainage

Ensure that the unit is unplugged. Remove the water reservoir and con-
nect a water drain hose to the spigot (as shown on figures). The other
end of this hose should be led to a drain or a suitable receptacle to col-
lect the water.
Note- for the unit to drain correctly, make sure the hose stays below the
level of the spigot.
Water spigot
Tipping Protection
The unit has a heater inside. In order to avoid over heating, the
unit is equipped with a tipping switch that automatically shuts off
the unit if it should tip over.
13