How To Change Water Pump; Water Pump Pipe And Water Pump Clip; Cool Switch And Wiring Connector; Water Pump Wiring Connection - Honeywell CO60PM Service Manual

2.3 How To Change Water Pump

Remove the back panel follow the procedure 2.1.1
Remove the right side panel follow the procedure 2.1.3
Remove the switch box follow the procedure 2.2.1
2.3.1

Water pump pipe and water pump clip.

Remove the water pump pipe.
2.3.2

Cool Switch And Wiring Connector

Use screw driver to remove 2
galvanized screws (ST3X10) on
cool switch of the control
panel.
2.3.3

Water Pump Wiring Connection

Water pump wiring connection refers to part 4.2 Wiring Color Description.
Website:
Use screw driver to remove 2
SS screws(ST4*12) on the
water pump clip.
Remove the brown wire on the
cool switch.
13
CONFIDENTIAL
http://www.honeywellaircoolers.com
Remove the wiring cap (below
picture shown) to get the water
pump.
Note: connection is between
water pump and N wire of
power cord.