How To Change Main Motor; Speed Switch And Wiring Connector; Fan Blade And Fan Motor; Main Motor Wiring Connection - Honeywell CO60PM Service Manual

2.4 How To Change Fan Motor
Remove the back panel follow the procedure 2.1.1
Remove the right side panel follow the procedure 2.1.3
Remove the switch box follow the procedure 2.2.1
2.4.1

Speed Switch And Wiring Connector.

Use screw driver to remove 2
galvanized screws (ST3X10)
on speed switch of the control
panel.
Remove the wiring cap (below
picture shown).
Note: connection is between
motor and power cord earth
wire.
2.4.2

Fan Blade And Fan Motor

Use screw driver to remove 1
galvanized screws (M6X14)
on fan blade.
2.4.3

Main Motor Wiring Connection

Main motor wiring connection refers to part 4.2 Wiring Color Description.
Website:
Remove the white/yellow/
blue wire on the speed
switch.
Remove the wiring cap
(below picture shown).
Note: connection is between
capacitor and the motor.
Remove the fan blade.
14
CONFIDENTIAL
http://www.honeywellaircoolers.com
Remove the wiring cap (below
picture shown).
Note: connection is between
fan motor COM wire(black)
and N wire of power cord.
Remove the wiring cap
(below picture shown).
Note: connection is between
capacitor and the motor.
Use screw driver to remove 8
galvanized screws (M5X12)
on fan motor to get the fan
motor.