Pro Logic Ii; Sound Mode; Speaker Setup; Cd Upsampling - Philips DVP3046 User Manual

DVD Setup Menu Options

Pro Logic II

This options allows you to set the Pro
Logic II output of your DVD player.
1
In 'AUDIO SETUP PAGE', press 3 4 to
highlight {PRO LOGIC II}, then press 2.
Off
Select this option to turn off Dolby Pro
Logic II output.
Music
Select this option to turn to music sound
mode.
Movie
Select this option to turn to movie sound
mode.
2
Press 3 4 to select a setting, then press
OK to confirm your selection.

Sound Mode

The options included in Sound Mode
Setup are: '3D', 'Movie Mode' and 'Music
Mode'.
1
In 'AUDIO SETUP PAGE', press 3 4 to
highlight {SOUND MODE}, then press 2.
2
Press the 3 4 keys to highlight an option.
3
Enter its submenu by pressing 2.
4
Press 3 4 to select a setting, then press
OK to confirm your selection.
3D
This function provides a virtual surround
sound experience using just two speakers.
➜
Off, Living Room, Hall, Arena and
Church
Movie Mode
Select a Sound Mode that matches the
type of music you are playing. These
preset Sound Modes adjust the frequency
bands of the video to enhance your
favourite movie sound track.
➜
Off, Sci-Fic, Action, Drama and
Concert
TIPS:
The underlined option is the factory default setting.
Press 1 to go back to the previous menu item. Press SETUP to exit the menu item.
30
01-43_DVP3046_94_eng_RC2
Music Mode
Select a Sound Mode that matches the
type of music you are playing. These
preset Sound Modes adjust the frequency
bands of the audio to enhance your
favourite music.
➜
Off, Digital, Rock, Classic and Jazz

Speaker Setup

This menu contains setup options for
your audio output which makes the
speaker setup system reproduce high
quality surround sound. For details, see
page 37.

CD Upsampling

This feature allows you to convert your
music CD to a higher sampling rate using
sophisticated digital signal processing for
better sound quality. If you have activated
the upsampling, the player will
automatically switch to stereo mode.
1
In 'AUDIO SETUP PAGE', press 3 4 to
highlight {CD UPSAMPLING}, then press 2.
Off
Select this to disable CD-upsampling.
88.2 kHz (X2)
Select this to convert the sampling rate of
the CDs twice higher than the original.
176.4 kHz (X4)
Select this to convert the sampling rate of
the CDs four times higher than the
original.
2
Press 3 4 to select a setting, then press
OK to confirm your selection.
Helpful hint:
– CD upsampling feature is only applicable
to stereo output setting.
30 30/06/06, 5:10 PM