Optional Connections; Connecting To An Stereo System; Stereo System Has Right/Left Audio In Sockets; Connecting To A Digital Av Receiver - Philips 436 User Manual

Connecting to an stereo
system
STEREO
Stereo system has right/ left Audio
In sockets
A
Select one of the video connections
(CVBS VIDEO IN, SCART,
COMPONENT VIDEO IN) depending on
the options available on your TV.
B
Use the audio cables (white/red) to
connect AUDIO OUT (L/R) sockets of
the DVD Player to the corresponding
AUDIO IN sockets on the stereo system
(cable not supplied).
TIPS: Before making or changing any connections, make sure that all the devices are disconnected from
the power outlet.
01-35 xDV436_12_19_eng4.indd 13 01-35 xDV436_12_19_eng4.indd 13
AUDIO
IN
DIGITAL
DIGITAL
VIDEO OUT
OUT
AUDIO OUT COAXIAL

Optional connections

Connecting to a digital AV
receiver
AV Receiver
DIGITAL
OUT
AUDIO OUT COAXIAL
Receiver has a PCM, Dolby Digital
or MPEG decoder
A
Select one of the video connections
(CVBS VIDEO IN, SCART,
COMPONENT VIDEO IN) depending on
the options available on your TV.
B
Connect the COAXIAL jack of the DVD
player to the corresponding Digital Audio
In socket on your receiver (cable not
supplied).
C
Set the DVD player's digital output to
PCM or ALL depending on the
capabilities of your receiver (see page 30
{Digital Out}).
Tip:
– If the audio format of the Digital Output
does not match the capabilities of your
receiver, the receiver will produce a strong,
distorted sound or no sound at all.
AUDIO
IN
DIGITAL
VIDEO OUT
13
2006-04-26 4:37:17 PM 2006-04-26 4:37:17 PM