Cembre LD-1P-ECO Operation And Maintenance Manual page 6

3.5) Templates for positioning the drill on the rails and stock rails
to enable drilling to be carried out according to the provisions of
railway boards standards:
e.g.:
– MPAF UIC54 on DRILLING AXIS of 54E1 rail
– MPAF UIC60 on DRILLING AXIS of 60E1 rail
•
Note: Contact Cembre for selection of specific application
accessories (e.g.: positioning templates for other rail profiles).
3.6) MPAU universal positioning template suitable both for repair-
ing existing holes on various fittings, and for drilling disused rails.
3.7) SPA positioning plates for drilling rail
heads with a centre-to-centre distance es-
tablished in the Railway boards standards,
without the need for marking out; for use
in conjunction with the MPAF... positioning
templates.
3.8) MRF clamp to be applied as a reference to the
head of rails for use, in conjunction with the SPA ...
connecting plates, for in-line drilling of the rail heads,
with established centre-to-centre distance.
3.9) VAL MPA metal box
suitable for accommodating
accessories 3.5 - 3.11.
6