Grounding - Kaiser KS 9, KK 6 User Manual

8
EN

GROUNDING

• The power cord has a three-pronged
grounded plug for your personal
safety. It must be connected to a
grounding type wall receptacle, in
accordance with the legislation gov-
erning electric installations in your
country, as well as any local regu-
lations. Do not remove the ground-
ing prong, do not use a two pronged
adaptor, and never make a connec-
tion to the schematic. Use the cord
supplied with the equipment (do not
change it). Ifthe cord is damaged,
it must be immediately replaced by
specialized personnel.
!
Attention! Earthing
provided for your safety. If there
is no earthing, contact a qualified
technician.
INSTALLATION
• Remove the package and self-
adhesive tape used to protect the
doors and accessories; use soap to
remove any glue residue;
• Keep expanded polystyrene pack-
ing elements; these elements, foil
and self-adhesive tape will be used
to pack the refrigerator for protec-
tion during transportation;
• Wash the refrigerator's interior and
accessories with warm water and
dishwashing liquid and then wipe
dry;
• Place the refrigerator in a dry ven-
tilated place protected from direct
sunlight and at a sufficient distance
from heat sources such as a kitchen
stove, radiator, etc. If this condi-
tion cannot be met, use a suitable
insulating plate when installing the
refrigerator near heat sources or
provide the following clearance from
heat sources: from the kitchen stove
– 3 cm; from oil or coal stoves – 30
cm;
must be