Iinstallation Instructions - Kaiser KS 9, KK 6 User Manual

6
EN

IINSTALLATION INSTRUCTIONS

ELECTRICAL CONNECTION
Before connecting the refrigerator to
the mains power supply, make sure
that:
• The supply voltage corresponds to
the specifications on the data plate
on the front of the oven.
• The mains supply has an efficient
ground connection complying with
all applicable laws and regulations.
Correct grounding is a legal require-
ment. If the appliance is not pre-fitted
with a power cable and/or plug, use
only suitable cables and plugs capa-
ble of handling the power specified on
the appliance's data plate and capa-
ble of resisting heat. The power cable
should never reach a temperature 50
°C above ambient temperature at any
point along its length.
If the appliance is to be connected di-
rectly to mains terminals, fit a switch
with minimum aperture of 3 mm be-
tween the contacts. Make sure that
the switch is of sufficient capacity for
the power specified on the appliance's
data plate, and compliant with applica-
ble regulations. The switch must not
break the yellow-green earth wire. The
socket or switch must be easily reach-
able with the oven fully installed.
!
Attention! Installation and electri-
cal connection must be made by a
qualified expert only.
!
Attention! The manufacturer de-
clines all responsibility for damage
or injury if the above instructions
and normal safety precautions are
not respected.