Rear Panel - Philips DVDR1000 Owner's Manual

24 Rear Panel

MAINS (AC Power)
Connect the supplied AC power cord here and to a stan-
dard AC outlet after completing all other connections.
TV jack
If your television only has a 75 ohm or RF coaxial jack, connect the
supplied RF coaxial cable to the TV jack on the DVD Recorder and to
the RF IN jack on the TV You will need an RF modulator. Details are
on page 9. For more information, refer to your TV owner's manual.
S-VIDEO IN (Y-C) (EXT1) jack
Use an S-video cable to connect this
jack to the S-Video Out jack of
optional additional equipment.
Details are on page 15.
S-VIDEO OUT (Y-C) (EXT1) jack
Connect the supplied S-Video cable
here and to a TV's S-Video In jack.
Details are on page 11.
COMPONENT VIDEO IN
(Y P P ) (EXT3) jacks
B R
Connect these jacks to the Component Video Out
jacks of optional additional video equipment (for
example, a DVD Player). Details are on page 15.
COMPONENT VIDEO OUT
(Y P P ) (EXT3) jacks
B R
Connect the supplied three-strand component
video cable here and to the Component Video
In jacks of a TV. Details are on page 10.
PROG SCAN OUT (Y P
(Progressive Scan)
Connect these jacks to a TV's Progressive
Scan In jacks if the TV has Progressive Scan.
Use the supplied three-strand component
video cable. Match the cable stripe colors to
the jack colors. If your TV does not have
Progressive Scan, use the COMPONENT
VIDEO OUT jacks instead. Details are on page
10. Also see your TV manual for details.
ANTENNA jack
Connect your antenna or Cable TV signal here.
Details are on pages 9-15.
VIDEO IN (CVBS) jack
Use a video cable to connect this jack to the Video
Out jack of other equipment. Details are on page 15.
VIDEO OUT (CVBS) (EXT2) jacks
Connect the supplied yellow-striped video cable to one of
the VIDEO OUT (CVBS) jacks and to the TV's Video In
jack. Details are on page 12. Use the extra VIDEO OUT
(CVBS) jack to connect the Recorder to other equipment.
EXT 3
COMPONENT VIDEO PROG
SCAN
Y Y
P P
B B
P P
R R
EXT 2 EXT 1
P ) jacks
B R
EXT 3
Y
L L
P
L
B
R
P
R
R R
EXT 1/2
DIGITAL AUDIO OUT OPTICAL jack
Connect a digital audio optical cable here and to
the digital audio optical In jack of a Stereo. Details
are on page 14.
AUDIO OUT/ IN (Left/Right) jacks
Use the supplied audio cables (with red and white stripes) to con-
nect the Recorder's AUDIO OUT jacks to the Audio In jacks of a
television or Stereo. Details are on pages 10-13.
Use the AUDIO IN jacks when connecting additional equipment
to the DVD Recorder. Details are on page 15.
IN RC 6 jack
Connect a wired
remote control (not
supplied) to the IN RC
6 jack if you prefer. Ask
your dealer for details
on compatible remotes.
The first signals from
the remote control may
be lost. The remote
control supplied with
the DVD Recorder will
operate all the
recorder's features.
IN
RC 6
DIGITAL AUDIO OUT COAX
(coaxial) jack
Connect a digital audio coaxial cable
here and to the digital audio coaxial In
jack of a Stereo. Details are on page 14.
Helpful Hints
• Each Audio and Video jack is
labelled EXT1, EXT2, or EXT3.
Use the same EXT (external)
number for the audio and video
connection to the TV. For
example, if you use S-VIDEO,
which is EXT1, use the EXT1
AUDIO jacks.
• Do not touch the inner pins of
the jacks on the rear panel.
Electrostatic discharge may
damage the unit permanently.
• You only need one audio and
one video connection to a TV.
You might not use all the jacks.