Connecting The Dvd Recorder - Philips DVDR 70/001 User Manual

B

Connecting the DVD recorder

The remote control and its batteries are packed separately in the original DVD recorder
packaging. You must install the batteries in the remote control before use - described in the
following section.
1
Take the remote control and the enclosed batteries (2 batteries).
2
Open the battery compartment, insert the batteries as shown and
then close the battery compartment.
The remote control is now ready to use.
Its range is approximately 5 to 10 meters.
In the following sections, you will need the remote control for the first time.
Aim the remote control at the DVD recorder and not at the TV set.
The necessary cable connections must be made before you can record or playback TV
programmes using your DVD recorder.
Connect the DVD recorder
the picture quality may be poor.
We recommend that you use a scart cable to connect your TV set and DVD recorder.
The scart or Euro AV cable serves as the universal connector for picture,
sound and control signals. With this type of connection, there is practically no
loss of quality in picture or sound transmission.
to your TV set. If there is a video recorder in between