Philips DVDR 70/001 User Manual page 23

Connecting the DVD recorder
3
Insert one end of the video (CVBS) cable into the yellow Cinch socket
OUT VIDEO (CVBS) at the back of the DVD recorder and the
other end into the video input socket (usually yellow) on the TV set
(usually labelled 'Video in' or 'AV in'. See TV operating instructions).
4
Insert one end of the audio (Cinch) cable into the red/white Cinch
socket OUT L AUDIO R at the back of the DVD recorder and the
other end into the audio input socket (usually red/white) on the TV
set (usually labelled 'Audio in' or 'AV in'. See TV operating
instructions).
5
Switch on the TV set. Switch the TV set over to the Video/Audio
input socket or select the relevant programme number. Please see
your TV's operating instructions for the programme number you need.
6
Insert one end of the supplied mains cable into the mains socket
4MAINS at the back of the DVD recorder and the other end into
the wall socket.
The most important features of the DVD recorder will appear in
scrolling text on the display. After the first installation is completed
this function will be switched off. How you switch on this function
again, read in the chapter 'User preferences' in the section 'standby'.
7
Switch on the DVD recorder using STANDBY/ON m . '
will appear on the display.
Then, read the paragraph on 'Initial installation' in 'Installing your DVD recorder'.
'