Philips DVDR 70/001 User Manual page 71

Programming a recording (TIMER)
1
Switch on the TV set. If required, select the programme number for
the DVD recorder.
2
Press TIMER on the remote control.
The programming method selected last is marked.
3
Select line '
confirm with the C button.
The information will appear on the screen.
4
Select the input field with D or C .
5
Enter information with CH- B or CH+ A or with the number
buttons 0..9 .
In ' ' use SELECT to select from the following options:
: Repeated daily recordings from Monday to Friday
: Repeated weekly recordings (every week on the same day, e.g.
Monday).
You can also programme recordings from external sources via scart socket
EXT 1 TO TV-I/O ('
Select the ' ' input field using TIMER . Using SELECT switch on
'VPS/PDC' (' ' lights up). If you press SELECT again, you will switch
'VPS/PDC' off (' ' goes out).
' input field using C .
Select the '
Use SELECT to select the recording mode.
6
If all information is correct, press the OK button. The programming
information is stored in a TIMER block.
7
To end, press TIMER .
8
Insert a DVD (one without write protection).
The disk you have inserted will be checked.
9
Switch off with STANDBY m .
The programmed recording will only function properly if the DVD
recorder has been
If any of the TIMER blocks are in use, '
' with CH- B or CH+ A . and
') or EXT 2 AUX-I/O ('
').
using the STANDBY m button.
' will light up on the recorder display.