Philips DVDR 70/001 User Manual page 25

Connecting additional devices
To copy camcorder recordings, you can use the front sockets. These sockets are located behind
the flap on the left hand side.
If you have a Hi8 or S-VHS(C) camcorder, connect the S-VIDEO input of the DVD recorder to
the appropriate S-VHS output on the camcorder.
You must also connect the audio input left AUDIO right on the DVD recorder to the audio
output on the camcorder.
If you have a camcorder that only has a single video output (Composite Video, CVBS), connect
the VIDEO input on the DVD recorder to the appropriate output on the camcorder.
You must also connect the audio input left AUDIO right on the DVD recorder to the audio
output on the camcorder.
Two audio output sockets OUT L AUDIO R are located on the back of the DVD recorder
(audio signal output left/right)
These can be used to connect the following:
This socket (input) on the amplifier is designed only for record players
without preamplifiers. Do
recorder.
The DVD recorder or the amplifier may be damaged as a result.
use this input for connecting the DVD