Canon X-07 User Manual page 97

LPRINT CHR$ ( 1 8)
Now, you can use the LLIST command.
Graphic commands
2.4.5
For detials of all the commands related to the X-710, please refer to
Chapter 3 Reference or the instruction manual for the X-710. This section
describes only the main graphic commands.
As the X-710 is a plotter-type printer, the basic commands are pen up, pen
down and the position of the pen. For example, the DRAW command draws a
line between two set of coordinates.
LPRINT"D 0, 0, 100, 100"
When a command such as above is executed, the pen is moved to and settled
on the (0,0) coordinates, and then, a line is drawn to the (100, 100) coor­
dinates. You can think of "D" as standing for "DRAW" or "DOWN".
They both mean the same. After the D command has been executed, unless
you execute the pen-up command, the pen remains lowered.
The pen is raised with the
LPRINT"M 200, 200"
88
M (MOVE)
command.