Canon X-07 User Manual page 123

1) The contents of the RAM file are inserted between two 4 byte FILE
KEYWORDs. When
the day and the time (hours, minutes and seconds) at which this
operation took place to be memorized.
RAMSTRT and RAMEND pointers indicate the starting and end
2)
locations of the RAM file, respectively.
The verify pointer is created from 2 bytes, and indicates the same start
3)
asRAMSTRT.
4)
There is a 2 byte area called FILE mark. It contains 5AH, and ASH.
5) When the RAM file is initialized, RAMSTRT and RAMEND indicate
the same area, and its content is
is set to 4+1+4+2+2= 13 bytes.
File name uses 6 bytes, file type 1 byte, length 2 bytes and spare 5 bytes.
6)
Files are condensed inside the RAM file. "00", if included at the
7)
beginning of a file, indicates the end of the preceding file.
8)
L is the remaining length. This is same as the unused area shown when
the DIR instruction is executed.
114
is depressed, the KEYWORDs causes
00.
And also, the size of the RAM file