1.7.7
Loading a program
The CLOAD command is used to load a saved program from a cassette tape.
First, load the cassette tape into the cassette recorder. Use the tape counter,
and fast forward the tape to a position a little before the beginning of the pro
gram you want to load. Next, set the cassette recorder to the playback mode
(when the REMOTE jack is connected). Then next, type,
CLO AD
�
The cassette tape,begins to move, and a little later, the following is dislayed:
Found: FILE
After the program has been loaded, the cassette recorder is automatically
stopped, and the cursor is displayed on the LCD.
When using a cassette recorder without a REMOTE jack, proceed in the same
way as when saivng a program.
"F I LE"
RETURN
File nam e
51