Canon X-07 User Manual page 37

When the ON/BREAK key is depressed, the LIST command is canceled, and
listing cannot be resumed even if you want to list the next program line. To list
the program again, the LIST command must be input again. This is very
inconvenient.
In such a case, use the
Listing of program is stopped, and when you want to see the next program
line, depress the
�
10
REM
20
INPUT"A , 8" ; A ,
30
PRINT"A+8"; A+8;
40
PRINT"A-8"; A-8
50
PRINT"A *
60
PRINT''A/B" ; A/B
It takes time to get the knack of using
stop at the program line you want. Use the LIST@ command to list program
lines one at a time so that you can study them in detail.
Type,
and the first program line is displayed. To display the next program line,
depress a key (it can be any key, for example, the RETURN key). Depress a
key again to display the next program line, and so on.
Now, if you list with LIST@ <line number> command, and depress the
this method to correct a program line with more than
The LIST command can also be used to display only certain range of program
lines.
If you type,
28
�
+
key to resume listing the program.
PROGRAM +
8
8" ;
A* B ;
"Break" is not displayed and the LCD is not scrolled. Use
key instead of the
-
*
+
W
keys so that listing will
60 characters.
keys.