Changing The Function Assigned To The [ A ] / [ B ] / [ C ] Keys - Yaesu FT-891 Operating Manual

Changing the function assigned to the [ A ] / [ B ] / [ C ] keys

The default setting are:
[ A ]( SFT ) key: IF SHIFT function
[ B ]( SCP ) key: The SCOPE function
[ C ]( NB ) key:
1. Repeatedly press the
ly until the desired function appears.
MULTI function knob to select
2. Rotate the
the desired function.
3. Press and hold any of the
to assign the function.
The desired function is saved and the display
returns to normal operation.
NOTE: Examples of the Function
Noise Blanker
: Function "OFF".
: Function "ON".
: Function "ON" and then turn the
assigned feature setting.
FT-891 Operating Manual
Noise Blanker function
[ F ] key momentari-
[ A ] / [ B ] / [ C ] keys
[ A ] / [ B ] / [ C ] key display as shown in the case of the
Setting Modes
MULTI function knob to change the
45