Setting Modes; Setting Modes Display; Using The Setting Modes - Yaesu FT-891 Operating Manual

Setting Modes

Setting Modes Display

[ F ] key momentarily to step through the Setting Modes as follows:
Press the
à FUNCTION-1 à FUNCTION-2 à CW SETTING à
The FM SETTING, the REC SETTING and the ATAS SETTING function screens may
be enabled via Menu modes "05-10", "05-11" or "05-12". With the factory default setting,
These functions are not displayed on the LCD When the
Once the function is set, it is not usually changed. Press and hold the
activate the Menu mode.

Using the Setting Modes

1. Repeatedly press the
ly until the desired function appears.
MULTI function knob to select
2. Rotate the
the desired function.
3. Press ( or press and hold ) the
tion knob to switch the function on or off.
Depending on the function, press the knob
again to change the setting value.
r Depending on the function, the pop-up
screen appears by switching the function
"ON".
The setting values may be changed by
rotating the MULTI function Knob.
r While the pop-up screen is displayed,
press the
close the pop-up screen.
4. Press and hold the
ting Modes" screen and resume normal operation.
44
[ F ] key momentari-
MULTI func-
MULTI function knob to
[ F ] key for one second, or rotate the DIAL knob to exit the "Set-
[ F ] key is pressed.
FT-891 Operating Manual
[ F ] key to