Power Connector - DFI 915GM-MIGF User Manual

Power Connector

Important:
To ensure that adequate power is provided, we strongly recommend
that you use a minimum of 250 Watt (or greater) power supply.
DIMM and PCI Standby Power LEDs
DIMM Standby
Power LED
PCI Standby
Power LED
Important:
If the DIMM Standby Power LED or PCI Standby Power LED is
lighted, you must power-off the system then turn off the power
supply's switch or unplug the power cord prior to installing any
memory modules or add-in cards.
Quick Setup Guide
1 1 1
3.3V
3.3V
-12V 3.3V
Ground
Ground
PS-ON +5V
Ground Ground
Ground +5V
Ground
Ground
-5V PW-OK
+5V 5VSB
+5V +12V
2 0 1 0
1
17