Specifications; Package Contents; General Information; Port Removal And Attachment - Ikelite 9306.35 Instruction Manual

Specifications

Diameter ..........................3.0 in. (76mm)
Length ..............................1.3 in. (33mm)
Weight ..............................3.2 oz (91g)
Zoom Limitation ..............Approximately 19.1mm
Depth Rating....................200ft (60m)

Package Contents

- 9306.35 Wide Angle Port
- 0200 Port Cover
- Ikelite Silicone Lubricant

General Information

This Wide Angle Port replaces the housing's original 3.9" front port and
is not removable underwater. The o-ring seal is visible through the inside
of the housing. Installation requires a strap wrench, not included.
Once the Wide Angle Port has been installed, 67mm threaded external
accessory lenses may be removed and replaced underwater.
Port Removal and Installation
A strap wrench will be needed to remove and install ports on your Ikelite
housing.
Ikelite offers strap wrench 0945.01 through any Ikelite authorized dealer.
Lightly lubricate the port o-ring with the supplied Ikelite lubricant. DO
NOT use excessive lubricant which can attract debris and prevent a
good seal. Use ONLY Ikelite lubricant. Other brand lubricants can cause
the o-ring to swell and not seal properly.
3