Ikelite 9295.02 Product Instruction Manual

Canon EOS 5D Mark III, 5DS, 5DS R Update Kit
Product Number 9295.02
This kit will allow the Canon 5D Mark IV camera to be used in a
Canon 5D Mark III, 5DS, 5DS R Ikelite housing.
Included in Kit
Installation - see Diagram on back page.
1. Remove control knobs shown in Diagram using 1/8" Hex
Key (included with housing).
2. Place one washer over each control shaft and replace
knobs.
3. Retighten each knob set screw on corresponding control
flat.
4. Check control functions.
Nylon Washer: Qty. 4