Page 1
12-24 x 1/2”Screw (Qty. 4 - includes two spares) Front of Tray Nylon Washer Lock Washer 3/16” Hex Head Wrench Thank you for choosing Ikelite equipment. Please read this instruction manual completely before attempting to operate or dive with this product.
Page 2
Attaching Handle to the Tray Insert handle into the tray as shown. The Quick Release Button should extend toward the back of the tray, diagram B, page 3. Attach and tighten handle to tray using a 3/16” Hex Head Wrench. Note: When using the Nikon D300s housing, the tray must be rotated 180°...
Page 3
Attach Tray to Housing Attach tray to housing using the 12-24 x 1/2” Screws and Shoulder Washers, diagram A. Tray may be attached using the front or rear Tray Attachment Points which best suit access to your housing controls, diagram B. When the tray is properly attached, the Quick Release Buttons will extend toward the rear of the housing.
Page 4
This product is warranted against any manufacturing defects for a period of one (1) year from the original date of purchase. Defective products should be returned to Ikelite postage paid. Ikelite will, at its sole discretion, repair or replace such products, and will return to customer postage paid.