Ikelite Wide Angle Port M67 Installation And Use

Wide Angle Port M67 for Sony Cyber-shot
RX100 VI Housing
Item number 9306.02

Included in the Box

•
Wide angle port
•
O-ring # 0132.30 (installed)
•
Vinyl cover # 0200 (installed)
•
Silicone lubricant # 0184.1

Tools Recommended

•
Rubber strap wrench # 0945.01 (not included)

Housing Compatibility

•
Ikelite Underwater Housings for Sony Cyber-shot RX100
VI # 6116.18

Important Notices

»
Do not use alcohol, cleaning agents, spray lubricants,
Rain-X, or other solvents on the housing or lens port.
Use of an incompatible chemical compound can
damage the plastic or component o-rings, which may
result in leaking.
»
This port is not recommended for use with any models
of RX100-series housings except as listed above.
Installation and Use

Removing the Standard Port

Rotate the lens port counter-clockwise to remove. We
1.
recommend using a rubber strap wrench (not included).
Store the port with o-ring in a dry, dust-free environment.
2.

Installing the Wide Angle Port

Check that the o-ring is in its groove on the back of the
1.
wide angle port.
Apply a very light, even coat of Ikelite silicone lubricant to
2.
the exposed surface of the o-ring.
Align the threads of the wide angle port with the threads
3.
of the opening in the front of the housing.
Facing the front of the housing, rotate the wide angle port
4.
clockwise and tighten until snug.