Unpacking; Warranty; Installation - ASL INTERCOM PS 6379 MK2 User Manual

In case AC mains is not available, the unit may be powered by an external DC power
source (24 – 30V) which can provide 105 watts.
3.0

UNPACKING

The shipping carton contains the PS 6379 Mk2, a power cable, 2 fuses and a 19" rack
mounting kit. After unpacking the unit please inspect for any physical damage to the unit
and retain shipping carton and relevant packing materials for use should the unit need
returning.
If any damage has occurred, please notify your dealer so that a written claim can be initi-
ated. Please also refer to the warranty section of this user manual.
4.0

WARRANTY

This unit is warranted by ASL Intercom to the original end-user purchaser against defects
in workmanship and materials in it's manufacture for a period of 12 months from date of
shipment to the end-user. Faults arising from misuse, unauthorized modifications or ac-
cidents are not covered by this warranty. If the unit is faulty, it should be sent in its original
packing to the supplier or local ASL dealer, with shipping prepaid. A note must be included
stating the faults found and a copy of the original supplier's invoice.
5.0

INSTALLATION

Adequate ventilation must be provided by allowing sufficient space around the sides and
rear of the unit to ensure free circulation of air. Forced cooling is not required. The power
supply is mounted on the bottom of the unit. After a period of time the unit will feel hot
to the touch at the top and the bottom; this is normal and should be no cause for alarm.
To connect the PS 6379 Mk2 to the user stations, use professional flexible microphone
cable with 2 wires and 1 shield only.
Connect these cables to the INTERCOM OUT connectors on the rear panel.
7