Broan QB130SS Instructions Manual page 4

SLOT
7 non-ducted inStallation onlY:
Remove Plastic diverter from Slot and discard diverter.
8 non-ducted inStallation onlY:
Replace non duct diverter cover with (2) Screws
removed in Step 6.
9 non-ducted inStallation onlY:
Remove (3) Screws from metal non duct louver
cover on top of hood. Discard Louver Cover only.
SCREWS
INTERNAL
PLASTIC
COVERS
non-ducted inStallation onlY:
10
Remove (5) Screws from the (2) internal Plastic
covers. Discard covers and screws.
PLASTIC
DIVERTER
METAL NON DUCT
LOUVER COVER
SCREWS
PLASTIC
LOUVER
non-ducted inStallation onlY:
11
Attach Plastic louver with (3) Screws removed
in Step 9.
BLOWER
HOUSING
THREADED
NUT
SPRING
12 non-ducted inStallation onlY:
Insert Springs and clip Screws into Plastic Filter clips
and screw into threaded nuts in Blower Housing.
non-ducted inStallation onlY:
13
Remove non duct Filter from plastic bag and insert
filter into its Plastic Housing. Place filter assembly over
Blower Housing and turn Filter clips to secure.
model QB130SS
Page 4
PLASTIC
FILTER
CLIP
CLIP
SCREW
PLASTIC
HOUSING
NON-DUCT
FILTER