1. To get a correct reading, the vehicle should be on level
ground. After turning off the engine, wait a few minutes for the
oil to drain back into the bottom of the engine.
2. Pull the dipstick out, hold a rag under the end and wipe it
clean.
3. Reinsert the dipstick and push it in as far as it will go, or the
reading will not be correct.
G62006
"GS430
1 Add oil
2 O.K.
3 Too full
G62005
"GS300 (two−wheel drive models)
1 Add oil
2 O.K.
3 Too full
ENGINE
531