Lexus GS430 User Manual page 141

Programming other devices
To program other devices such as home security systems,
home door locks or lighting, contact your authorized Lexus
dealer for assistance.
Reprogramming a button
R
Individual HomeLink buttons cannot be erased, however, to
reprogram a single button, follow the procedure "Programming
R
the HomeLink ".
INFORMATION
Keep your hand−held garage transmitter even after
programming. The hand−held garage transmitter will
be required if reprogramming is necessary.
(b) Operating the HomeLink
R
To operate the HomeLink , press the appropriate HomeLink
button to activate the programmed device. The HomeLink
indicator light should come on. If the "Rolling Code" type
program is registered, the HomeLinkr indicator light flashes
several times, then remains on. The HomeLink
send the signal for up to 20 seconds as long as the button is
pressed.
The transmitting range from the HomeLinkr may differ
from that from your hand−held garage transmitter.
(c) Erasing the entire HomeLink
R
R
R
To erase all previously programmed codes at one time, press
and hold down the 2 outside buttons for 20 seconds until the
indicator light flashes.
R
continues to
If you sell your vehicle, be sure to erase the programs stored
in the HomeLink
INTERIOR EQUIPMENT
INFORMATION
(all three programs)
G14061
R
memory.
R
memory
117