Table of Contents
Advertisement
3. Use one hand to keep the drive from falling out of the bottom case, then flip the
case upside down to access the screw holes. Use a Phillips driver to install the two
shorter screws in the holes highlighted below in red. This will secure the drive to the
bottom case. When you have installed both screws, flip the bottom case back over.
4. Position the top cover on top of the bottom case, as shown in the picture below.
3
OWC EXPRESS
DEVICE SETUP
Advertisement
Table of Contents
Need help?
Do you have a question about the EXPRESS and is the answer not in the manual?
Questions and answers