Table of Contents
Advertisement
One-Touch Recording 35
The One-Touch Recording (OTR) feature allows you to set an imme-
diate timed recording 30 minutes to eight hours long. Before you
begin:
Set up theTV channelsat the DVD/VCR. Detailsare on page 17.
Select a recording speed (SP, S LP)with the SPEED button.
Put a tape in the cassettecompartment of the DVD/VCR. Make
sure the tape's record tab is intact and the tape is long enough to
record the program(s).
÷ If the end of a tape is reached during an OTR, the DVD/VCR will
eject the tape.The DVD/VCR will switch to DVD mode immedi-
ately,and theTIMER SETlight will blink.To let the OTR continue,
insert another tape in the DVD/VCR.
To return to VCR mode, press the TIMER SET button on the front
of the DVD/VCR, then press the DVD/VCR OUTPUT button so
that the green VCR light appearson the front of the DVD/VCR.
Placethe DVD/VCR inVCR mode. Pressthe DVD/VCR OUTPUT
button so that the greenVCR light appearson the front of the
DVDp/VCR.
Placethe DVD/VCR inVCR position. Pressthe VCR/TV button so
that theVCR/TV light appears on the front of the DVD/VCR.
I
Press theVCR button, then press the CHANNEL
A/v
but-
tons or the Number buttons to select the channel you want
to record.
2
Press the RECORD button repeatedly until the desired
recording length (30 minutes to eight hours) appears on the
screen. Recording will begin immediately.The RECORD light and
the TIMER SETlightwill appear on the front of the DVD/VCR.
TR (0:30)
CHI2
)
3
To stop an OTR before recording is finished, press the STOP
button.
To cancel the OTR but continue recording, press the RECORD but-
ton repeatedly until REC appearsin the upper lee corner of the TV
screen.(STATUSmust be set to ON. Seepage 23 for details.) The
RECORD light will remain on the front of the DVD/VCR, but the
TIMER SETlight will disappea_
When the OTR finishes, if no timer recordings are set,the TIMER
SET light will blink.The DVD/VCR power will turn off automatically.
When the power is turned on again,the DVD/VCR will be in DVD
mode.To return to VCR mode, pressthe TIMER SETbutton, then
press the DVD/VCR OUTPUT button so that theVCR light appears
on the front of the DVD/VCR. (TheTIMER SETlight will disappear.)
Q
©
ovDw_
v_:_ ix,
o_puT
",lE,,_O_y
OVO
•
V¢_
[D El
123153[23
oo.....
6 0
000
81
PHILIPS
j
Helpful Hints
Tocheck the time remaining for an
OTR after the OTRhas been seL press
the DISPLAY/STATUS/EXIT burton.
• Tochangethe recordinglength while
an OTRis in progress,press the
RECORD button until the desired
length appears on the screen.
• If you begin an OTR when another
recordingis paused,the OTRwill
begin.
• Youcan not pause an OTR.
If the preset time for a timer record-
ing comesup during an OTR,the OTR
has priority.A messagewill remind you
when the timer recordingwassched-
uled to begin.Youmay let the OTR
continue,the timer recordingwill not
take place.Or, stop the OTRand press
the TIMER SETbutton immediately.
The timer recordingwill take place if
you press the TIMER SETbutton
before the timer recording'sscheduled
start time.
Advertisement
Table of Contents
