Auto Repeat; Recording; Recording & One-Touch Timer Recording (Otr) - Philips DVP3355V User Manual

Auto Repeat

When "AUTO REPEAT" is set to "ON", the cassette tape will automatically rewind and start over when it reaches the end.
This will continue until auto repeat function is turned off.
1
Press [SETUP] and choose "AUTO REPEAT".
Note(s):
• The auto repeat function can also be set "ON" or "OFF" by pressing [REPEAT] on the Remote Control.
• To cancel auto repeat function, follow step 1 above. Then, press [B] so that "OFF" appears beside "AUTO REPEAT". Press [SETUP] to exit.
• The auto repeat playback will start automatically if you select "AUTO REPEAT" to "ON" in the Stop mode.
Recording g
This Unit has no tuner system so it cannot receive TV broadcasts without an External
Tuner (Cable/Satellite or Converter Set-top Box) or such devices.
Note(s):
• You can also set to External Tuner. Refer to "Satellite Link" on page 18.
Recording & One-touch Timer Recording (OTR)
1 2
Insert a recordable
cassette tape.
3
Press [SPEED] to select the desired tape speed.
Tape speed
Type of tape
SP mode
SLP mode
SP
4
Press [REC I] until desired recording time is selected.
REC
(normal recording)
OTR (8:00)
REC
5 6
Press [C (STOP)] to
stop recording.
You CANNOT dub a DVD to a video cassette tape.
Timer Recording
• Insert a recordable cassette tape.
• Make sure to turn on the External Tuner (Cable/Satellite or Converter Set-top Box).
1
Press [SETUP]. Select "TIMER PROGRAMMING".
- M E N U -
TIMER PROGRAMMING
SATELLITE LINK
B AUTO REPEAT
CLOCK SET
LANGUAGE SELECT
or
Press [INPUT] until "L1" or "L2" is
displayed on the TV screen. Select "L1"
to activate rear input jacks. Select "L2"
to activate front input jacks.
See note on the right.
Recording / playback time
T60 T120 T160
1hour 2hours 2-2/3hours
3hours 6hours 8hours
OTR (0:30) OTR (1:00).....
OTR (7:30)
Press [OPEN/CLOSE A] to eject
the recorded cassette tape.
- M E N U - TIMER PROGRAMMING
B TIMER PROGRAMMING
PROG 12345678
SATELLITE LINK
DATE
AUTO REPEAT [OFF]
START TIME
CLOCK SET
END TIME
LANGUAGE SELECT
L1/L2
REC SPEED
Available program number flashes.
2
Press [B] to "AUTO REPEAT" to set "ON" or
"OFF".
[OFF]
Press [SETUP] to exit.
5
To stop recording temporarily (pause mode) p
Press [F (PAUSE)].
• During the recording in pause mode, 5 C marks appear on the
TV screen. Each C mark represents 1 minute.
• Press it again to resume recording.
• Pause mode will be automatically cancelled after 5 minutes to
prevent damage to the cassette tape and the video heads.
Note(s):
• Do not change the External Tuner's (Cable/Satellite or Converter
Set-top Box) channel while you are recording. You CANNOT watch one
channel while recording another channel at the same time.
• Connect your External Tuner (Cable/Satellite or Converter Set-top Box)
to the L1 (rear panel) jacks on this Unit. Connect camcorders and other
such devices to the L2 (front panel) jacks. Refer to page 11, 13.
Accidental Erasure Prevention
To prevent accidental recording, remove erasure
prevention tab on the cassette tape. To record
on it later, cover the hole with adhesive tape.
2
Select an empty program number.
Then press [B] to go to next step.
or
– 16 – –
TV this Unit External Tuner
(Cable/Satellite or
Converter Set-top Box)
2
6
5
3
6 4 1
4
g p y (p
erasure prevention tab
Continued on next page.
- M E N U -
TIMER PROGRAMMING
SATELLITE LINK
B AUTO REPEAT [ON]
CLOCK SET
LANGUAGE SELECT
)
PROGRAM NUMBER 1
DATE – – / – –
START TIME – – : – – – –
END TIME – – : – – – –
L1/L2 – –
REC SPEED – –
EN