Table of Contents
Advertisement
12 Optional H ookups
•,
• J,o,,
,o,,.
Jr,
,o,
• o,i
• o9,,
• t66t
• • .,0
• • • oft
• ,,661,
or,,
• ,t6ot
• • *t6o
.oft
• ,t66°,
Jtt,t,
• otto,
,•Boo6o,ott
• tot_,,o,,
You may connect the DVD/VCR several different ways, depending on your existing equipment and your prefer-
ences for sound and picture quality.To determine which hookup is best for you, examine the options on the fol-
lowing pages, then see which best matches your situation. Before you hook up the DVD/VCR, remember:
• Connect the DVD/VCR directly to aT_. If you connect the DVD/VCR to aVCR, then connect the VCR to
the TV, the picture may be distorted by the copyright protection
system.
• Turn off the power of all equipment before making any connections.
• Refer to the owner's manuals of your other equipment for additional information.
• Depending on your connection, you may need to purchase additional cables.
• When you use the DVD/VCR AUDIO
anclVIDEO OUT jacks on the DVD/VCR, press the DVD/VCR OUT-
PUT button to selectVCR mode (or DVD mode).
Connecting
the DVD/VCR
to a Stereo TV
9
Otto,
ANT-IN
Jack
Video Cable
Audio Cables
Audio andVideo
IN Jackson TV
I
Connect
the antenna or cable to the ANT-IN
(Antenna
In) jack of your DVD/VCR.
2
Connect
the red and white audio cables (supplied)
to the red and white
DVD/VCRAUDIO
OUT
jacks on the DVD/VCR
and to the red and white AUDIO
IN jacks on the "IV, matching
the cable
colors to the jack colors.
If the TV has a single AUDIO
IN jack, use the white audio cable to connect the
DVD/VCR's white DVD/VCR AUDIO
OUT jack to the TV's AUDIO
IN jack.You will not use the red audio
cable.
3
Connect the yellow video cable (supplied) to the DVD/VCRVIDEO
OUT jack on the DVD/VCR
and to theVIDEO
IN jack on theTV. Or, for better picture quality, connectan S-Video cable (not sup-
plied) to the S-VIDEO OUT jack on the DVD/VCR and to the S-VIDEO IN jack on the TV.You will not use
the supplied yellow video cable.
4
Connect
theTV's
power cord to a power
outlet. Turn on theTV
and set it to the Audio/Video
In
channel, which also may be referred to asA/V In or Auxiliary In.This channel usually is located near channel00.
See your'iV
owner's manual for details.Or, if you used the S-Video cable at step 3, select the S-Video In channel at
your "i_ See yourTV owner's manual for details.
5
Connect
the DVD/VCR's
power cord to a power outlet,
Press the POWER
button, then
press the
DVD/VCR
OUTPUT
button
so that the DVD
light appears on the DVD/VCR.
"HELLO" will appear
briefly on the DVD/VCR's display panel.You should see the DVD logo on theTV screen briefly.If you do not,
check your connections and make sure the'iV
is set to the correct Audio/Video In channel. If there is no disc
in the DVD/VCR,"no
DISC" will appear on the displaypanel.
Advertisement
Table of Contents
