Yamaha RX-V3900 Owner's Manual page 83

■ Dynamic Range (Dynamic range)
Use this feature to select the amount of dynamic range
compression to be applied to your speakers or
headphones. This setting is effective only when the unit is
decoding bitstream signals.
Speaker (Speaker dynamic range)
Adjusts the dynamic range compression for the speakers.
Headphone (Headphone dynamic range)
Adjusts the dynamic range compression for the
headphones.
Choice
MAX
Preserves the greatest amount of dynamic
range.
STD Adjusts the dynamic range to medium.
When this unit is decoding Dolby TrueHD
signals, the dynamic range control is always
active regardless of the instruction of the
input source signals.
MIN/AUTO • MIN: Adjusts the dynamic range to
narrow when this unit is decoding
bitstream signals (except Dolby TrueHD).
• AUTO: Adjusts the dynamic range
according to the instruction of the input
source signals when this unit is decoding
Dolby TrueHD signals.
■ Parametric EQ (Parametric equalizer)
Use this feature to adjust the parametric equalizer of each
speaker.
PEQ Data Copy (Parametric equalizer data copy)
Use this feature to copy the result data of the automatic
setup to the manual configuration area. You can select the
parametric equalizer type applied to the copied result data
of the automatic setup. See page 35 for the descriptions of
each parametric equalizer type.
Choice
Flat h Manual
Copies the result of the automatic setup that
the "Flat" type parametric equalizer is
applied to.
Front h Manual
Manual Copies the result of the automatic
setup that the "Front" type parametric
equalizer is applied to.
Natural h Manual
Copies the result of the automatic setup that
the "Natural" type parametric equalizer is
applied to.
Functions
Descriptions
Graphical user interface (GUI) menu
PEQ Select (Parametric equalizer type select)
Use this feature to select the parametric equalizer type that
applied to the results of the automatic setup. page 35 for
the descriptions of each parametric equalizer type.
Choice
Manual Applies the manually configured parametric
equalizer in "Setup".
Flat Applies the "Flat" type parametric equalizer.
Front Applies the "Front" type parametric
equalizer.
Natural Applies the "Natural" type parametric
equalizer.
Through Does not use the parametric equalizer.
Notes
• When you carry out the automatic setup, this unit automatically
set "PEQ Select" to "Natural".
• "Level" settings (page 77) also change corresponding to the
setting of "PEQ Select".
• This unit does not change the configurations of "Manual" even
if you perform the automatic setup.
Manual parametric equalizer configuration of
each speaker
Use this feature to adjust the tonal quality of each speaker.
You can copy the results of the automatic setup for the
base of the manual configuration by using "PEQ Data
Copy". Set "PEQ Select" to "Manual" in advance.
1
Press 9 k / n / l / h to select "Test Tone" or
the speaker you want to adjust.
Choice
Front L Front left speaker
Front R Front right speaker
Center Center speaker
Surround L Surround left speaker
Surround R Surround right speaker
Surround Back L Surround back left speaker
Surround Back R Surround back right speaker
Front Presence L Front presence left speaker
Front Presence R Front presence right speaker
Subwoofer Subwoofer
Descriptions
Adjusted speaker
79
En