Weslo Pursuit 530 User Manual page 6

1.
To make assembly easier, read the
information on page 5 before you begin
assembling the exercise cycle.
While another person lifts the front of the Frame
(1), attach a Stabilizer (2) with two M10 x 65mm
Carriage Bolts (30) and two M10 Locknuts (33)
(only one is shown).
2. Attach the other Stabilizer (2) to the Seat Frame
(5) with two M10 x 65mm Carriage Bolts (30)
and two M10 Locknuts (33).
3. Insert the Seat Frame (5) into the Frame (1).
Next, firmly press the Seat Frame Bushing (20)
into the Frame (1). Attach the Seat Frame
Bushing with two M4 x 5mm Screws (65).
Tighten the Adjustment Knob (9) into the Frame
(1).
Carefully tip the exercise cycle onto its side.
Attach the two Bumpers (66) to the Frame (1)
with two M4 x 8mm Screws (64).
Then, tip the exercise cycle onto the Stabilizers
(2).
1
30
2
1
2
33
3
9
1
65
66
64
6
33
5
33
2
65
20
5
2
30