...4 CONFIGURATION
...4.5.2 Configuring the Chart View
Vertical and Horizontal Chart Views only
Circular Chart View only
72
OR
Select Horizontal --> (Chart runs left to right with scale bar on
left), Horizontal <--(chart runs right to left with scale bar on
right), Vertical or Circular chart view.
Select the annotations to be displayed on the chart. Alarm
events and operator messages are displayed on the chart
adjacent to the point at which the alarm occurred – see
Section 2.3.
This initial setting can be changed by the operator if 'Chart
annotation select enable' is enabled in the Chart view menu
enables – see 'Menu Enables' on the next page.
Set the number of major vertical divisions to be displayed on
the scale bar and the chart.
Set the number of minor vertical divisions to appear between
the major chart divisions on the scale bar.
Set the number of divisions to appear on the chart.