Depth Adjustment - Carat Dustcatch 125 Instruction Manual

CUTTING
ZAAGRICHTING
DEPTH-ADJUSTMENT
1. Release the thumb screw.
2. Match the base line with the scale line of the required cutting depth.
3. Tighten the thumb screw.
Vacuum hose
[p]
duct
[a]
- Securely connect the Vacuum Hose to the Duct
of [a] Main Unit by [p] Hose Adapter,
- Then turn the Angle Grinder and Vacuum on,
- Start cutting
WARNING
1. Make sure the blade is cutting in the right
direction.
2. Ensure no gaps between the material and
bottom surface of [a] Main Unit, otherwise the
dust could escape.
Base line
Cutting depth
13
Scale
Thumb
screw