Table of Contents
Advertisement
You will need the manual for the safety warnings and precautions, assembly instructions,
operating and maintenance procedures, parts list and diagram. Keep your invoice with this
manual. Write the invoice number on the inside of the front cover. Keep the manual and
invoice in a safe and dry place for future reference.
READ AND UNDERSTAND ALL INSTRUCTIONS. Failure to follow all instruc-
tions listed below may result in electric shock, fire, and/or serious injury.
1.
Keep your work area clean and well lit. Cluttered benches and dark areas invite
accidents.
2.
Do not operate power tools in explosive atmospheres, such as in the presence of
flammable liquids, gases, or dust. Power tools create sparks which may ignite the
dust or fumes.
3.
Keep bystanders, children, and visitors away while operating a power tool.
Distractions can cause you to lose control. Protect others in the work area from debris
such as chips and sparks. Provide barriers or shields as needed.
SKU 90827
90827.p65
2
SPECIFICATIONS
Item
Power Consumption
18 VDC
Battery Charger
Input: 120 VAC, 60 Hz
Output: 18 VDC, one hour charge; LED light
Battery
18 Volts, 1.7 Amps, Ni-Cad
Chuck Type
SDS Plus, 20 mm
Drill Settings
Hammer or Drill
Speed
Drill: 0~1040 RPM;
Hammer: 0~3100 Blows per Minute (BPM)
Switch
Electronic variable speed trigger: Forward,
Reverse, and Locking positions
Dimensions
14-1/2 (L) x 3-3/4 (W) inches
Weight
8 lbs.
Accessories
1 – 8 mm chisel (SDS-Plus)
1 – 25 mm wood bit (SDS-Plus)
1 – extra battery
Features
- High Impact Housing
- Side grip handle
SAVE THIS MANUAL
GENERAL SAFETY RULES
WARNING!
SAVE THESE INSTRUCTIONS
Work Area
Page 2
Description
11/19/03, 9:52 AM
Advertisement
Table of Contents
