Table of Contents
Advertisement
Owner's Manual & Safety Instructions
Save This Manual
operating, inspection, maintenance and cleaning procedures. Write the product's serial number in the
back of the manual near the assembly diagram (or month and year of purchase if product has no number).
Keep this manual and the receipt in a safe and dry place for future reference.
1-9/16" VARIABLE SPEED
SDS MAX TYPE
ROTARY HAMMER
REV 14f
When unpacking, make sure that the product is intact
and undamaged. If any parts are missing or broken,
please call 1-888-866-5797 as soon as possible.
©
Copyright
2011 by Harbor Freight Tools
No portion of this manual or any artwork contained herein may be reproduced in
any shape or form without the express written consent of Harbor Freight Tools.
Diagrams within this manual may not be drawn proportionally. Due to continuing
improvements, actual product may differ slightly from the product described herein.
Tools required for assembly and service may not be included.
Keep this manual for the safety warnings and precautions, assembly,
Visit our website at: http://www.harborfreight.com
Email our technical support at: productsupport@harborfreight.com
®
. All rights reserved.
Read this material before using this product.
Failure to do so can result in serious injury.
SAVE THIS MANUAL.
ITEM 69334
Advertisement
Table of Contents
Related Manuals for Chicago Electric 69334
Summary of Contents for Chicago Electric 69334
- Page 1 (or month and year of purchase if product has no number). Keep this manual and the receipt in a safe and dry place for future reference. ITEM 69334 1-9/16" VARIABLE SPEED SDS MAX TYPE ROTARY HAMMER Visit our website at: http://www.harborfreight.com...
-
Page 2: Table Of Contents
2. Do not operate power tools in explosive atmospheres, such as in the presence of flammable liquids, gases or dust. Power tools create sparks which may ignite the dust or fumes. Page 2 For technical questions, please call 1-888-866-5797. Item 69334... -
Page 3: Safety
A wrench or a key left attached to a rotating part of the power tool may result in personal injury. Item 69334 For technical questions, please call 1-888-866-5797. Page 3... -
Page 4: Rotary Hammer Safety Warnings
• Any power cord must be properly 7. Avoid unintentional starting. grounded. Ground Fault Circuit Interrupter Prepare to begin work before turning on the tool. (GFCI) should also be implemented – it prevents sustained electrical shock. Page 4 For technical questions, please call 1-888-866-5797. Item 69334... - Page 5 If any abnormal as tingling, numbness, and white or blue fingers), seek medical advice as soon as possible. vibration occurs, stop use immediately. SAVE THESE INSTRUCTIONS. Item 69334 For technical questions, please call 1-888-866-5797. Page 5...
- Page 6 Association, and the National Electrical Code. 2. Double insulated tools may be used in either of the 120 volt outlets shown in the preceding illustration. (See Outlets for 2-Prong Plug.) Outlets for 2-Prong Plug Page 6 For technical questions, please call 1-888-866-5797. Item 69334...
- Page 7 Do not cover ventilation ducts. Keep flammable objects away. n 0 xxxx/min. No Load Revolutions per Minute (RPM) WARNING marking concerning Risk of Electric Shock. Properly connect power cord to appropriate outlet. Item 69334 For technical questions, please call 1-888-866-5797. Page 7...
-
Page 8: Specifications
Note: For additional information regarding the parts listed in the following pages, refer to Parts List and Diagram on page 14. Functions Grease Port Auxiliary Trigger (108) Handle (117) Chuck (3) Mode Selector (86) Figure A Page 8 For technical questions, please call 1-888-866-5797. Item 69334... -
Page 9: Operation
The power cord must reach the work area with enough extra length to allow free movement while working. Item 69334 For technical questions, please call 1-888-866-5797. Page 9... -
Page 10: Changing Drill Bits
3. Back the bit out of the hole often during drilling, especially when drilling deep holes. 6. When drilling deep holes, work in stages, use a short bit for the beginning of the hole, then change to a longer bit. Page 10 For technical questions, please call 1-888-866-5797. Item 69334... -
Page 11: Chiseling
3. Squeeze and hold the Trigger to the tool indoors out of children’s reach. turn on the Rotary Hammer. 4. Allow the Rotary Hammer to reach full speed before contacting the work surface. Item 69334 For technical questions, please call 1-888-866-5797. Page 11... -
Page 12: Maintenance
Grease Port Cover Figure D: Grease Port NOTICE: Warranty void if grease maintenance (internal and bit shank) is not followed. Page 12 For technical questions, please call 1-888-866-5797. Item 69334... -
Page 13: Troubleshooting
LICENSED TECHNICIANS, AND NOT BY THE BUYER. THE BUYER ASSUMES ALL RISK AND LIABILITY ARISING OUT OF HIS OR HER REPAIRS TO THE ORIGINAL PRODUCT OR REPLACEMENT PARTS THERETO, OR ARISING OUT OF HIS OR HER INSTALLATION OF REPLACEMENT PARTS THERETO. Item 69334 For technical questions, please call 1-888-866-5797. Page 13... -
Page 14: Parts List And Diagram
Flat Key Cable Clamp Bearing Binding Post Circlip Capacitor Circlip Light First Gear Screw Circlip Band Needle Bearing T-Screw Steel Ball Side Handle Holder Active Plate Auxiliary Handle Inner Spring Page 14 For technical questions, please call 1-888-866-5797. Item 69334... -
Page 15: Assembly Diagram
Note: If product has no serial number, record month and year of purchase instead. Note: Some parts are listed and shown for illustration purposes only, and are not available individually as replacement parts. Item 69334 For technical questions, please call 1-888-866-5797. Page 15... -
Page 16: Warranty
Limited 90 Day Warranty Harbor Freight Tools Co. makes every effort to assure that its products meet high quality and durability standards, and warrants to the original purchaser that this product is free from defects in materials and workmanship for the period of 90 days from the date of purchase.