Page 1
. All rights reserved. No portion of this manual or any artwork contained herein may be reproduced in any shape or form without the express written consent of Harbor Freight Tools. For technical questions and replacement parts, please call 1-800-444-3353...
Do not modify this tool and do not use this tool for a purpose for which it was not intended. SKU 93722 For technical questions please call 1-800-444-3353 Specifications...
Page 3
Lead from lead-based paints Crystalline silica from bricks and cement or other masonry products Arsenic and chromium from chemically treated lumber (California Health & Safety Code § 25249.5, et seq. ) SKU 93722 For technical questions please call 1-800-444-3353 Page 3...
Page 4
Use of any other parts will void the warranty. Only use accessories intended for use with this tool. Approved accessories are available from Harbor Freight Tools. 18. Do not operate tool if under the influence of alcohol or drugs. Read warning labels on prescriptions to determine if your judgment or reflexes are impaired while taking drugs.
Auxiliary Handle with Depth Gauge Quick Charge Battery Recharge Unit If any parts are missing or broken, please call Harbor Freight Tools at the number on the cover of this manual. NOTE: Battery will not reach full charge the first time they are charged. Allow several cycles (operation followed by recharging) before the Battery will become fully charged.
Page 6
Be sure the Battery is properly installed before using the tool. SKU 93722 For technical questions please call 1-800-444-3353 Installing the Battery Pack Page 6...
Page 7
1000 mm. If extra long bits are used, a shorter bit must be used first to start the hole. CAUTION: Use only SDS-Plus bits with this tool. SKU 93722 For technical questions please call 1-800-444-3353 SDS-plus chuck operation...
Standard bits will not be properly held by this Chuck, and may break under the force created by this tool. SDS-Plus impact grade bits are available from Harbor Freight Tools. The Auxiliary Handle must be installed for additional stability when Hammer Drilling.
Page 9
CAUTION: Do not press the Forward-Reverse Switch while the tool is operating. This might damage the tool. SKU 93722 For technical questions please call 1-800-444-3353 Hammer Drill Hammer Only Drill Only...
When not in use, remove the Battery Pack and store both tool and Battery Packs in its case in a dry, secure location. Always dispose of used batteries properly. Contact your local hazardous waste authority for proper disposal guidelines. SKU 93722 For technical questions please call 1-800-444-3353 Troubleshooting Maintenance...
LICENSED TECHNICIANS AND NOT BY THE BUYER. THE BUYER ASSUMES ALL RISK AND LIABILITY ARISING OUT OF HIS OR HER REPAIRS TO THE ORIGINAL PRODUCT OR REPLACEMENT PARTS THERETO, OR ARISING OUT OF HIS OR HER INSTALLATION OF REPLACEMENT PARTS THERETO. SKU 93722 For technical questions please call 1-800-444-3353 Parts List...
Assembly Drawing NOTE: Some parts are listed and shown for illustration purposes only and are not available individually as replacement parts. SKU 93722 Page 12 For technical questions please call 1-800-444-3353...