Table of Contents
Advertisement
ITEM
Electrical Requirement
Impactor Travel
Overall Dimensions
Blows per minute
No load speed
Retainer Style
Bit Dimensions:
Noise Level
Impact Energy
Tool Weight
Maximum Drill Bit Capacity
Maximum Core Bit Capacity
NOTE: Plug this tool into a 20 Amp dedicated circuit. Use GFCI Plug.
You will need this manual for the safety warnings and precautions,
assembly, operating, inspection, maintenance and cleaning procedures,
parts list and assembly diagram. Keep your invoice with this manual. Write
the invoice number on the inside of the front cover. Keep this manual and
invoice in a safe and dry place for future reference.
Failure to follow all instructions listed below may result in
1.
Keep your work area clean and well lit. Cluttered benches and dark areas invite
accidents.
SKU 94944
PRODUCT SPECIFICATIONS
1.65" (21mm)
29" L X 6-3/8"W X 9-3/4" H (hammer only)
750 - 1950
100 - 250 RPM
Chisel Bit (part#119): 3/4" Shank X 14-7/8" L
Masonry Drill (part# 118): 3/4" Dia. X 16-1/2" L
105 db (A)
3.7 to 18.4 Ft/Lbs.
32.2 Lbs.
1.9" (concrete, brick, limestone)
SAVE THIS MANUAL
GENERAL SAFETY RULES
READ AND UNDERSTAND ALL INSTRUCTIONS
electric shock, fire, and/or serious injury.
SAVE THESE INSTRUCTIONS
WORK AREA
DESCRIPTION
120 Volt / 60 Hz / 16 Amps (running)
Spring loaded rotational lock (2 positions only)
5.9" (concrete, brick, limestone)
WARNING!
PAGE 2
REV 07e
Advertisement
Table of Contents
