Save The Logs; Save The System Logs - NETGEAR ProSAFE WC7500 User Manual


To specify the length of the HTTP session time-out for the wireless controller:
1. Open a web browser, and in the browser's address field, type the wireless controller's IP
address.
By default, the IP address is 192.168.0.250.
The wireless controller's login window opens.
2. Enter your user name and password.
3. Click the Login button.
The wireless controller's web management interface opens and displays the Summary
page.
4. Select Maintenance > Remote Management > Session Timeout.
5. In the Timeout (minutes) field, specify number of minutes before an active HTTP login
session expires.
The default session time-out is 5 minutes.
6. Click the Apply button.
Your settings are saved.

Save the Logs

You can save the system logs that are collected on the wireless controller. You can also save
the logs for an individual access point.
If a problem or failure occurs, the system logs along with backed-up configuration settings
could help determine the cause.

Save the System Logs

You can save the system logs to a zipped log file on your computer.
The information that is stored in the system logs depends on the log settings. For information
about how to configure which information is recorded and stored in the logs, see
the Syslog Settings for an Internal Syslog Location
ProSAFE Wireless Controller
Maintain the Wireless Controller and Access Points
264
on page 114.
Configure