NETGEAR ProSAFE WC7500 User Manual page 2

Support
Thank you for purchasing this NETGEAR product. You can visit
access the latest downloads and user manuals, and join our community. We recommend that you use only official NETGEAR
support resources.
Conformity
For the current EU Declaration of Conformity, visit http://kb.netgear.com/app/answers/detail/a_id/11621.
Compliance
For regulatory compliance information, visit http://www.netgear.com/about/regulatory.
See the regulatory compliance document before connecting the power supply.
Trademarks
© NETGEAR, Inc., NETGEAR and the NETGEAR Logo are trademarks of NETGEAR, Inc. Any non-NETGEAR trademarks are
used for reference purposes only.
Revision History
Publication Part Publish Date
Number
202-11659-03 November 2016
202-11659-02 October 2016
202-11659-01 April 2016
ProSAFE Wireless Controller
www.netgear.com/support
Comments
• Updated license information for the WC7500 wireless controller (see
Licenses).
• Added the following new features:
- Support for model WAC740 (see
- Link aggregation for WAC740 access point (see
Information on the Managed AP List
WAC740 Access Point).
- MU-MIMO for the WAC740 access point (see
for the Basic Profile Group
Advanced Profile Group).
- Enhanced syslog support for all wireless controller models (see
Configure the Syslog Settings for an Internal Syslog
- AirQual for the WAC740 access point (see
Group and View AirQual for the Channels in a Profile
- Diagnostic option to send logs for controller-managed access points
over the network (see
Point).
- Diagnostic option to capture packets for controller-managed access
points (see Capture WiFi
• Added Appendix A, Controller-Managed Access
the limited web management interface for controller-managed access
points.
• First publication of the combined manual for all models.
• Introduction of model WC7500 and model WC7600v2.
2
to register your product, get help,
Supported NETGEAR Access
Change Access Point
and Enable Link Aggregation on a
Configure WiFi Settings
and Configure WiFi Settings for an
Manage AirQual for a Profile
View the Console Debug Logs of an Access
Packets).
Points, which describes
Points).
Location).
Group).