Remove A Wifi Obstruction Area; Change The Name, Map, Or Dimensions Of A Floor - NETGEAR ProSAFE WC7500 User Manual

Remove a WiFi Obstruction Area

After you add and save a WiFi obstruction area on a floor, you can remove it from the floor.

To remove a WiFi obstruction area from a floor:
1. Open a web browser, and in the browser's address field, type the wireless controller's IP
address.
By default, the IP address is 192.168.0.250.
The wireless controller's login window opens.
2. Enter your user name and password.
3. Click the Login button.
The wireless controller's web management interface opens and displays the Summary
page.
4. Select Plans > Planning.
The page displays the Planning icons.
5. In the building tree on the left, click the + icon of the building that contains the floor.
The floor names display.
6. Click the floor name.
The floor map displays.
7. Click the Area
8. Click the area on the map.
9. Click the Delete link.
10. Click the Save
Your settings are saved.
11. To remove another area, repeat

Change the Name, Map, or Dimensions of a Floor

You can change the basic properties of a floor, including those for the default floor.

To change the name, map, or dimensions of a floor:
1. Open a web browser, and in the browser's address field, type the wireless controller's IP
address.
By default, the IP address is 192.168.0.250.
The wireless controller's login window opens.
2. Enter your user name and password.
3. Click the Login button.
ProSAFE Wireless Controller
icon.
icon.
Step 7 though
RF Planning and Deployment
66
Step 10.