Table of Contents
Advertisement
If one or more access points do not transition to the Connected state (see the Status
column in the Managed AP List), see
page 365.
For information about how to manage the Managed AP List, see
AP List
on page 167.
Discover Access Points Installed and Working in
Standalone Mode in Different Layer 3 Networks
Access points that are installed and working in standalone mode in different Layer 3 networks
are access points that do not function in the same subnet as the wireless controller but in
different IP ranges and that are connected to the wireless controller through a router.
Note:
Make sure that DHCP option 43 (vendor-specific information) is
enabled on an external DHCP server. For more information, see
Layer 3 Discovery Guidelines
In a large WiFi network you might need to run the Discovery Wizard several times.
To discover access points in different Layer 3 networks:
1.
Open a web browser, and in the browser's address field, type the wireless controller's IP
address.
By default, the IP address is 192.168.0.250.
The wireless controller's login window opens.
2.
Enter your user name and password.
3.
Click the Login button.
The wireless controller's web management interface opens and displays the Summary
page.
4.
Select Access Point > Discovery Wizard.
ProSAFE Wireless Controller
Resolve Problems With Access Points
on page 155.
Discover and Manage Access Points
163
on
Manage the Managed
Hide quick links:
Advertisement
Table of Contents
