Change The Password On An Access Point - NETGEAR ProSAFE WC7500 User Manual

The Network Settings page displays. (The full path is Configuration > System >
Network Settings.)
4. In the Link Aggregation section, select the enable radio button.
By default, the disable radio button is selected.
5. Click the Apply button.
You changes are saved.

Change the Password on an Access Point

Do not change the password on a controller-managed access point. The admin password of
the wireless controller is pushed to all access points that the wireless controller manages.
(For information about changing the admin password of the wireless controller, see
the Password of the Default admin Account of the Wireless Controller
If you do change the password on a controller-managed access point, the change is
automatically reversed when the access point synchronizes with the wireless controller and
the password of the wireless controller is pushed to the access point.
In some situations when the access point is not managed by a wireless controller but does
not function in standalone more either, you might want to change the password. For example,
when the access point is not managed by a wireless controller and you do not want anyone
ProSAFE Wireless Controller
Controller-Managed Access Points
383
Change
on page 237).