Table of Contents
Advertisement
High-Level Configuration Examples
This section includes the following subsections:
•
Single Controller Configuration With Basic Profile Group
•
Single Controller Configuration With Advanced Profile Groups
•
Stacked Controller Configuration
Single Controller Configuration With Basic Profile Group
A basic configuration consists of a single wireless controller that controls a collection of
access points that are organized into the basic default group.
To set up a single wireless controller system with a basic profile group:
Step Configuration
1.
Configure the system and network settings of the wireless
controller:
1.
Configure the country code of operation.
2.
Configure the time settings.
3.
Configure the IP address of the wireless controller.
4.
Verify that VLAN 1 is set as the management VLAN and is
marked as untagged.
By default, VLAN 1 an untagged management VLAN.
5.
If no network DHCP server is accessible to the access points,
configure the wireless controller's DHCP server.
2.
Configure up to eight profiles, and for each profile, do at least the
following:
1.
Configure an SSID for WiFi access.
2.
Configure the network authentication and data encryption.
3.
Assign the VLAN.
4.
If necessary for the selected network authentication option,
configure the authentication server.
3.
Run the Discovery Wizard and add the access points to the
managed access point list.
ProSAFE Wireless Controller
System Planning and Deployment Scenarios
39
Web Management Interface Path
Configuration > System > General
Configuration > System > Time
Configuration > System > IP/VLAN
Configuration > System > DHCP
Server
Configuration > Profile > Basic
Configuration > Security > Basic >
Authentication Server
Access Point > Discovery Wizard
Hide quick links:
Advertisement
Table of Contents
