Festool T 12+3 Original Operating Manual page 18

GB
T 12+3, T 15+3, T 18+3
11 Accessories
Use only original Festool accessories and
Festool consumable material intended for
this machine because these components are
designed specifically for the machine. Using
accessories and consumable material from
other suppliers will most likely affect the
quality of your working results and limit any
warranty claims. Machine wear or your own
personal workload may increase depending
on the application. Protect yourself and your
machine, and preserve your warranty claims
by always using original Festool accessories
and Festool consumable material!
The order numbers of the accessories and
tools can be found in the Festool catalogue or
on the Internet under "www.festool.com".
12 Disposal
Do not throw the power tool in your house-
hold waste! Dispose of machines, accesso-
ries and packaging at an environmentally re-
sponsible recycling centre. Observe the valid
national regulations.
EU only: European Directive 2002/96/EC stip-
ulates that used electric power tools must be
collected separately and disposed of at an en-
vironmentally responsible recycling centre.
Return used or faulty battery packs to your
local specialist retailer, Festool after-sales
service or a designated public waste man-
agement facility. The battery packs will then
be recycled. (Observe the regulations appli-
cable in your country). The batteries must be
discharged on return.
EU only: European Directive 91/157/EEC
stipulates that faulty or used battery packs/
batteries must be recycled.
13 Transport
The equivalent amount of lithium in the LiIon
battery pack is less than the applicable limit
value and certified as per UN manual ST/SG/
AC.10/11/rev. 3 part III, subsection 38.3.
The LiIon battery pack is therefore not sub-
ject to national and international dangerous
goods regulations, neither as an individual
component nor as a fitted machine compo-
nent. However, dangerous goods regulations
may apply when several battery packs are
transported, in which case you may have to
fulfil special conditions. Refer to ADR special
regulation 230 for more information relevant
for the EU.
18
14 Warranty
We offer a warranty for material and produc-
tion defects for all our tools in accordance
with the locally applicable legal provisions,
but for a minimum of 12 months. Within the
EU member states, the warranty period is 24
months (verification through invoice or deliv-
ery note). Damage caused by the operator,
natural wear, overloading, incorrect handling
or through the use of the equipment not
specified in the operating manual, or damage
which was known at the time of purchase, is
not covered by the warranty. Furthermore,
damage caused by the use of non-original
accessories and consumable materials (e.g.
sanding pads) is also excluded.
Complaints can only be accepted if the tool is
returned while still assembled to the supplier or
an authorised Festool Customer Service work-
shop. Keep the operating manual, safety in-
structions, spare parts list and purchase receipt
in a safe place. Otherwise the current warranty
conditions of the manufacturer shall apply.
Note
Due to continuous research and develop-
ment work, we reserve the right to make
changes to the technical content of this doc-
umentation.
15 EU Declaration of Conformity
Cordless drill
T 12+3
T 15+3
Year of CE mark: 2007
T 18+3
Year of CE mark: 2010
We declare under sole responsibility that this
product complies with the following direc-
tives and standards:
2006/42/EC, 2004/108/EC, EN 60745-1, EN
60745-2-1, EN 60745-2-2, EN 55014-1, EN
55014-2.
Charger
TRC 3
Year of CE mark: 2007
We declare under sole responsibility that this
product complies with the following direc-
tives and standards:
Serial no.
493533
494374
496958
Serial no.
494635, 494636,
494637